The equipment is used as a termination point for the feeder cable
to connect with drop cable in FTTx communication network system.
The fiber splicing, splitting, and distribution can be done in this
box, and meanwhile it provides solid protection and management for
the FTTx network building.
1. Total enclosed structure.
2. Material: PP, wet-proof, water-proof, dust-proof, anti-aging,
protection level up to IP68.
3. Clamping for feeder cable and drop cable, fiber splicing,
fixation, storage, distribution...etc all in one.
4. Cable, pigtails, and patch cords are running through their own
paths without disturbing each other, micro type PLC splitter
installation, easy maintenance.
5. Distributionpanel can be flipped up, feeder cable can be placed
by expression port, easy for maintenance and installation.
6. Support pole/wall mounting, aerial cable mounting installation,
suitable for both indoor and outdoor use.
1. Environmental requirement
Working temperature: -40℃～+85℃
Relative humidity: ≤85% (+30℃)
Atmospheric pressure: 70KPa~106Kpa
2. Main technical datasheet
Insertion loss: ≤0.15dB
UPC return loss: ≥50dB
APC return loss: ≥60dB
3. Thunder-proof technical datasheet
The insulation resistance between the grounding device and the
metal parts of the box is no less than 2MΩ/500V (DC); IR≥2MΩ/500V.
The voltage resistance between the grounding device, and the boxand
its metal parts is no less than 3000V (DC)/min, no puncture, no
4. Configuration table:
Table 1 Model and configuration
Size (Pic 1)
|Into the largest cable diameter (mm)|
Cable outlet size(mm)
|GFS-16Q||353*230*132||16||52*194/214*266||15||2*3 / Ø5|
|GFS-16Q-1||353*230*132||16||52*194/214*266||15||2*3 / Ø5|